Alloy and temper confirmation
Alloy, temper, dimensions and tolerances are normalized before quotations are compared.
05 / INDUSTRY SOURCING
Aluminum Manufacturers in Turkey
Compare Turkish aluminum suppliers by alloy, temper, dimensional tolerance, volume and delivery terms.
01 / PRODUCT SCOPE
What we can source.
The scope is adapted to your technical and commercial requirements. These product groups are a practical starting point.
- 01Aluminum billets
- 02Extrusion profiles
- 03Sheets and coils
- 04Machined components
02 / SUPPLIER REVIEW
Fit before introduction.
Tolerance and surface review
Extrusion, machining, coating and fabrication capabilities are reviewed as separate process steps.
Mill certificate coordination
Mill certificates, inspection records, finish samples and packing plans are linked to the agreed specification.
03 / SECTOR CONTEXT
Where capability is concentrated.
Aluminum and metal sourcing is approached as a specification and process-control task: alloy, temper, tolerance, finish, fabrication and packing must all match the end use.
- 01Istanbul and Kocaeli: extrusion, distribution, machining, fabrication and export logistics
- 02Bursa: automotive-linked machining, profiles, casting and metal fabrication
- 03Konya: machining, casting, industrial components and project-based fabrication
- 04Izmir and Manisa: extrusion, coated profiles, industrial and construction applications
04 / BUYER DUE DILIGENCE
What should be checked before an order.
The exact legal and technical requirements depend on product configuration and destination. The points below define the sourcing conversation; they are not a substitute for destination-market conformity advice.
Standards & product evidence
- EN 755 or the contractually agreed equivalent for applicable extruded rod, bar, tube and profiles
- EN 754 or the agreed equivalent for applicable cold-drawn products
- EN 1090 and construction-product obligations where structural construction use makes them applicable
- Material certificate format, chemical composition, mechanical properties and traceability agreed before order
- Coating thickness, colour tolerance, adhesion and appearance criteria defined by the end use
Documents to request
- Material and dimensional specification with revision control
- Mill or inspection certificate linked to heat or batch
- Tooling drawing, ownership, maintenance and replacement terms
- First article or dimensional inspection report
- Coating/anodizing process and test records where required
- Packing specification, bundle weight, labels and loading plan
Realistic MOQ signals
- Stock profiles and sheets: distributor pack or bundle quantities may be possible
- Custom extrusion: billet, die and press setup normally create higher minimum runs
- Machined parts: prototype quantities may be possible, with unit cost falling at series volume
- Powder coating or anodizing: colour and bath setup can create separate batch minimums
Common buyer mistakes
- Sending only a 2D drawing without alloy, temper, tolerance and finish requirements
- Comparing quotations that include different tooling ownership or scrap assumptions
- Approving a colour from a screen rather than a controlled physical sample
- Ignoring straightness, twist, visible-surface and cosmetic acceptance criteria
- Using export packing that allows profile-to-profile rubbing or moisture damage
05 / PACKING & SHIPPING RISK
A good product can still arrive as a bad delivery.
Packing is treated as part of the product specification, not as an afterthought.
- 01Surface scratches, dents and profile deformation during handling
- 02Mixed heat numbers, alloys or colour batches in one delivery
- 03Corrosion staining caused by trapped moisture or incompatible wrapping
- 04Container weight, bundle length and unloading method not agreed in advance
06 / SAMPLE & PRODUCTION ROUTE
A realistic route from brief to shipment.
Drawing review
Confirm alloy, temper, tolerance, critical dimensions, finish and annual volume.
Tooling and trial
Agree tooling ownership, trial quantity and first-article approval criteria.
Finish sample
Approve physical colour, gloss, texture and visible-surface standard.
Batch production
Control certificates, dimensions, finish, packing and shipment traceability.
07 / SECTOR FAQ
Questions buyers ask about aluminum sourcing.
Can you source custom aluminum extrusions?
Yes. A section drawing, alloy, temper, tolerances, finish, cut length and estimated volume are needed to identify the right press and commercial route.
Who owns the extrusion die?
It depends on the quotation. Ownership, storage, maintenance, modification and replacement terms should be written into the order.
Can a sample be made before the full run?
Usually a trial extrusion or first article can be arranged. It should be dimensionally checked and approved together with the finish sample.
How should quotations be compared?
Normalize alloy, net/gross weight basis, scrap, tooling, machining, finish, packing, Incoterm and payment terms before comparing unit price.
Can you verify material certificates?
We can check consistency between the order, certificate, batch identification and inspection records. Laboratory verification can be scoped separately when required.
What packing information is needed?
Profile length, bundle size and weight, separator material, moisture protection, lifting points, container plan and unloading method.
08 / SECTOR REQUEST
Request aluminum sourcing.
Start with five essentials, then add drawings, standards, target price or Incoterm if available.
- Takes approximately 2 minutes.
- Response within one business day.
- Your requirement is not published.